Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Commands (A-C)
▀ clear subscribers
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Disconnects subscriber sessions that are using the PDG service.
must be an existing service and be from 1 to 63 alpha and/or numeric characters.
Clears counters for subscribers accessing the Packet Data Interworking Function (PDIF) service.
must be an existing service and be from 1 to 63 alpha and/or numeric characters.
: Disconnects all subscribers for all P-GW services on this system.
: Disconnects subscribers based on their International Mobile Subscriber Identification
(IMSI).
must be the 3 digit MCC (Mobile Country Code), follow by the 2 or 3 digits of the MNC (Mobile
Network Code) and the MSIN (Mobile Subscriber Identification Number).
should not exceed 15 digits.
Example: 123-45-678910234 must be entered as 12345678910234
The EBI (EPS Bearer Identity)
The EBI (EPS Bearer Identity)
must be a valid EBI and be an integer value from 5 to 15.
: Disconnects all subscribers using this P-GW service.
must be an existing P-
GW service and be from 1 to 63 alpha and/or numeric characters.
: Disconnects all subscribers using this S-GW IP address.
must be
an existing IPv4 address and be specified in dotted-decimal notation.
For GGSN, disconnect subscribers whose subscriber type matches the specified type.
Disconnects subscribers based on their QCI identity.
must be an integer value from 0 to 9.
Disconnects subscribers who have received the specified number of bytes of data.
: Filters output so that only information less than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information less than the specified value is cleared.
: If no other filtering options are specified only output matching
is cleared. If
is not
specified all data is cleared. value must be an integer from 0 through 18446744073709551615.
Disconnects subscribers based on their S5 interface protocol type.
: Indicates that the GTP protocol is used on the S5 interface for the subscribers being disconnected.
: Indicates that the PMIP protocol is used on the S5 interface for the subscribers being disconnected.
The amount of time left for the subscriber session.
: Filters output so that only information less than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information greater than the specified value is cleared.
: Filters output so that only information less than the specified value is cleared.