Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 5302
  Exec Modes Commands (D-S) 
lawful-intercept ssdf  ▀   
Cisco ASR 5000 Series Command Line Interface Reference  ▄  
 
  OL-22948-01 
lawful-intercept ssdf 
This command is used to configure and provision the SSDF generic interface for LI Call Content interception during 
CSCF session in IMS network. 
Product
 
SCM 
Privilege
 
Security Administrator, or Administrator, Operator, or Inspector with li-administrator permissions 
Syntax
 
De-provisions a previously configured lawful-intercept. 
The IP address of the DF to which the system sends intercepted data. 
 must be an 
IPv4/IPv6 address in desired notation. 
The port of the DF to which the system sends intercepted data. 
 can be any integer value from 
1 to 65535. 
Identifies the destination context for intercepted packets. This keyword is mandatory if provisioning is done 
in a different context. 
 must be an alpha/numeric string of 1 to 79 characters that specifies the name of an existing 
context. 
Identifies the Serial Number of the Access Function (AF) for validation which is to be provisioned on SSDF 
interface. 
 must be an ASCII string of 1 to 79 characters that represents the serial number of the access 
function equipment.. 
Identifies the software version of the software running on the Access Function (AF) for validation which is to 
be provisioned on SSDF interface. 
 must be an ASCII string of 1 to 79 characters that represents the software version running on the 
access function equipment..