Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Modes Commands (D-S)
port ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
port
Performs a manual switchover to an available redundant/standby line card or SPIO port.
Default: none.
Product
All
Privilege
Security Administrator, Administrator, Operator
Syntax
Identifies the physical chassis slot where the line card or SPIO card is installed.
Identifies the physical port on the line card or SPIO to automatically switch to.
Usage
This command is used to specify the redundant port on a Line Card (LC). When port redundancy is enabled,
if an external network device or cable failure occurs that causes a link down failure on the port, then the
redundant port is used.
if an external network device or cable failure occurs that causes a link down failure on the port, then the
redundant port is used.
Important:
This command is not supported on all platforms.
Example