Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (D-G)
show file ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show file
Displays the contents of the file specified. The contents are paginated as if it were normal ASCII output.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Specifies the location of a file to display.
may refer to a local or a remote file.
must be entered
using one of the following formats:
ASR 5000:
[
]{
|
|
}[
]
{
[
] }[
]
[
[
] ] {
}[
][
]
Important:
Use of the SMC hard drive is not supported in this release.
is the directory name.
is the actual file of interest.
is the user to be authenticated.
is the password to use for authentication.
is the user to be authenticated.
is the password to use for authentication.
is the IP address or host name of the server.
is the logical port number that the communication protocol is to use.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.
Usage
Display the contents of files to view such information as log data, trace information, etc.
Example
The following will display the contents of the local file
The following will display the contents of the local file
.