Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (M-P)
show ppp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
show ppp
Displays the point-to-point protocol information, detailed or summarized, for one or all connections by the use of
filtering options.
filtering options.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Provides an optional modifier to the output for the level and type of information.
: indicates the point-to-point protocol statistics are to be displayed.
: indicates all available information is to be displayed.
: indicates only a summary of available information is to be displayed.
: indicates all available information is to be displayed.
: indicates the PPP information only for the call specified by
is to be
displayed.
must be specified as a 4-byte hexadecimal number.
: specifies that PPP information only for the subscriber with the specified id be displayed. The IMSI
(International Mobile Subscriber Identity)
is a 15 character field which identifies the subscriber‘s home
country and carrier.
: specifies a mobile subscriber ID only for which information is to be displayed.
must
be from 7 to 16 digits specified as an IMSI, MIN, or RMI.
: specifies a user only for which PPP information is to be displayed where the user
is specified as
.
Statistics for all packet data services is displayed.
] : Display statistics only for the time the session is connected to
the specified PCF (Packet Control Function) or for all PCFs. pcf_ip_addr must be specified using the
standard IPv4 dotted decimal notation.
standard IPv4 dotted decimal notation.
: Display statistics only for the service specified by
.
must be from 1 to 63 alpha and/or numeric characters.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.