Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ACL Configuration Mode Commands
▀ redirect css service (for uplink, by source IP address masking)
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
The IP address(es) form which the packet originated.
This option is used to filter all packets from a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this option. The range can then
be configured using the
This option is used to filter all packets from a specific IP address or a group of IP addresses.
When specifying a group of addresses, the initial address is configured using this option. The range can then
be configured using the
parameter.
This option is used in conjunction with the
option to specify a group of addresses for
which packets are to be filtered.
The mask must be entered as a complement:
The mask must be entered as a complement:
Zero-bits in this parameter mean that the corresponding bits configured for the
parameter must be identical.
One-bits in this parameter mean that the corresponding bits configured for the
parameter must be ignored.
Usage
Define a rule definition when any packet from the IP addresses which fall into the group of addresses
matching the IP address masking. This allows the reduction of filtering rule definitions as it does not require a
rule definition for each source and destination pair.
matching the IP address masking. This allows the reduction of filtering rule definitions as it does not require a
rule definition for each source and destination pair.
Example
The following command defines a rule definition to redirect packets to a charging service named
The following command defines a rule definition to redirect packets to a charging service named
.