Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Global Configuration Mode Commands
▀ card-standby-priority
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
card-standby-priority
Configures the redundancy priorities for the Packet Services Cards (PSC or PSC2) by specifying the slot number search
order for a standby card when needed. Not available for the XT2 platform.
order for a standby card when needed. Not available for the XT2 platform.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Specifies the slot of the card for the order of the standby cards.
must be in the range from 1
through 16 excluding slots 8 and 9.
may be repeated as many times as necessary to indicate the
complete search order.
Usage
Set the standby order of the redundant cards when multiple standby cards are available.
Questionable hardware should be placed lower in the priority list.
Questionable hardware should be placed lower in the priority list.
Important:
This command replaces the
command.
Important:
This command is not supported on all platforms.
Example
The following command configures the redundancy priority to use the standby cards in slots 16, 14, and 12 in that order:
The following command configures the redundancy priority to use the standby cards in slots 16, 14, and 12 in that order: