Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Global Configuration Mode Commands
▀ snmp target
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
snmp target
Configures remote receivers of SNMP notifications.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the specified target as a receiver of unsolicited SNMP messages.
Reads the authentication type and password if the security level of the SNMP messages is set to
or
. Authentication types are:
: Configures the hash-algorithm to implement MD5 per RFC 1321.
: Specifies that the hash protocol is Secure Hash Algorithm.
: Specifies that the hash protocol is Secure Hash Algorithm.
Sets the security level of the SNMPv3 messages, as follows:
: No authentication and encryption is used.
: Only authentication will be used.
: Both authentication and encryption will be used.
: Reads the privacy type and password.
Specifies a logical name to use to refer to the remote receiver.
must be from 1 to 31 alpha and/or
numeric characters.
Specifies the IP address of the receiver.
must be specified using the standard IPv4 dotted
decimal notation.
Specifies that this destination is only used for SNMP traps which have been specifically identified.