Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
GTPP Server Group Configuration Mode Commands
▀ gtpp max-cdrs
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
gtpp max-cdrs
Configures the maximum number of charging data records (CDRs) to be included in a packet.
Product
GGSN, SGSN
Privilege
Security Administrator, Administrator
Syntax
Sets the default configuration.
Default: 1
Specifies the maximum number of CDRs to insert in a single packet must be an integer from 1 to 255.
Specifies the maximum number of CDRs to insert in a single packet must be an integer from 1 to 255.
Default: Disabled
Configures the number of seconds the GSN waits to send the packet while accumulating CDRs as defined by
Configures the number of seconds the GSN waits to send the packet while accumulating CDRs as defined by
. If the
interval expires before
is reached, then this keyword over-rides
and the packet is sent.
any integer from 1 to 300.
Important:
interval can only be enabled if the value for
is greater
than 1.
Usage
The system places CDRs into a packet until either
is met,
times out, or the
maximum PDU size, configured by the
command, is met.
The
and the
parameters take priority over
Important:
This command‘s configuration is ignored if CDRs are stored on an SMC hard disk.
Example
The following command configures the system to place a maximum of 10 CDRs in a single GTPP packet with a wait-
time of
The following command configures the system to place a maximum of 10 CDRs in a single GTPP packet with a wait-
time of
seconds: