Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 5302
  LNS Service Configuration Mode Commands 
ip source-violation  ▀   
Cisco ASR 5000 Series Command Line Interface Reference  ▄  
 
  OL-22948-01 
ip source-violation 
This command configures settings related to IP source-violation detection. 
Product
 
PDSN, GGSN 
Privilege
 
Security Administrator, Administrator 
Syntax
 
Default: disabled 
Configures the service to reset the reneg-limit and drop-limit counters after receipt of a properly addressed 
packet. 
Default: 10 
Sets the number of allowed source violations within a detection period before forcing a call disconnect. If 
 is not specified, the value is set to the default. 
 can be any integer value from 1 to 1000000. 
Default: 120 
The length of time, in seconds, for a source violation detection period to last. drop-limit and reneg-limit 
counters are decremented each time this value is reached. 
The counters are decremented in this manner: reneg-limit counter is reduced by one (1) each time the period 
value is reached until the counter is zero (0); drop-limit counter is halved each time the period value is 
reached until the counter is zero (0). If 
 is not specified, the value is set to the default. 
 can be any integer value from 1 to1000000. 
Default: 5 
Sets the number of allowed source violations within a detection period before forcing a PPP renegotiation. If 
 is not specified, the value is set to the default. 
 can be any integer value from 1 to 1000000. 
Usage
 
This function is intended to allow the operator to configure a network to prevent problems such as when a 
user gets handed back and forth between two PDSNs a number of times during a handoff scenario. 
This function operates in the following manner: