Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
MIPv6HA Service Configuration Mode Commands
▀ reg-lifetime
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
reg-lifetime
Specifies the longest registration lifetime that the HA service will allow in any Registration Request message from the
mobile node.
mobile node.
Product
PDSN, HA
Privilege
Security Administrator, Administrator
Syntax
Sets the registration lifetime to infinite.
Specifies the registration lifetime.
time is measured in seconds and can be configured to any integer value between 1 and 262140. Default is
600.
time is measured in seconds and can be configured to any integer value between 1 and 262140. Default is
600.
Usage
Use to limit a mobile nodes lifetime. If the mobile node requests a shorter lifetime than what is specified, it is
granted. However, Per RFC 2002, should a mobile node request a lifetime that is longer than the maximum
allowed by this parameter, the HA service will respond with the value configured by this command as part of
the Registration Reply.
The chassis is shipped from the factory with the registration lifetime set to 600 seconds.
granted. However, Per RFC 2002, should a mobile node request a lifetime that is longer than the maximum
allowed by this parameter, the HA service will respond with the value configured by this command as part of
the Registration Reply.
The chassis is shipped from the factory with the registration lifetime set to 600 seconds.
Example
The following command configures the registration lifetime for the HA service to be 2400 seconds:
The following command configures the registration lifetime for the HA service to be 2400 seconds:
The following command configures an infinite registration lifetime for MIPv6 calls: