Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
OSPF Configuration Mode Commands
▀ area authentication
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
area authentication
Enables authentication for the specified OSPF area.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
}
[
]
{
|
}
[
]
Disables authentication for the specified area.
The IP address, in IPv4 dotted-decimal notation, of the area where authentication will be enabled.
The identification number of the area where authentication will be enabled. This must be an integer from 0
through 4294967295.
through 4294967295.
Sets the OSPF authentication type to use the message digest 5 (MD5) authentication method.
Usage
Use this command to enable authentication of OPSF areas.
Example
The following command enables authentication for an OSPF area defined by the IP address
The following command enables authentication for an OSPF area defined by the IP address
and
the OSPF authentication type to MD5:
area
area
authentication message-digest