Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
OSPF Configuration Mode Commands
area virtual-link ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
area virtual-link
This command configures a virtual link between an area that cannot be physically connected to the network backbone
and an area that is physically connected to the network backbone.
and an area that is physically connected to the network backbone.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
}
The IP address, in IPv4 dotted-decimal notation, of the transit area.
The identification number of the transit area. This must be an integer from 0 through 4294967295.
The router id, in dotted-decimal notation, of the ABR to be linked to.
Usage
Use this command to create a virtual link between an area that is connected to the network backbone and an
area that cannot be connected to the network backbone.
area that cannot be connected to the network backbone.
Example
The following command creates a virtual link between the OSPF areas defined by the IP address
The following command creates a virtual link between the OSPF areas defined by the IP address
and the IP address
:
area
virtual-link