Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
OSPF Configuration Mode Commands
▀ network area
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
network area
This command enables OSPF on an interface and defines the OSPF area for that network.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
{
|
}
The network address and mask that specify the interface on which OSPF will be enabled. This in entered in
dotted-decimal notation, followed by the ―/‖ and the mask. Example: 192.168.1.0/24.
dotted-decimal notation, followed by the ―/‖ and the mask. Example: 192.168.1.0/24.
The OSPF area identification number for the specified network. This must be an integer from 0 through
4294967295.
4294967295.
The IP address of the OSPF area for the specified network. This must be entered in dotted-decimal notation.
Usage
Use this command to specify the IP address of the network interface that the OSPF router will use.
Example
The following command specified that the OSPF router will use the interface at IP address
The following command specified that the OSPF router will use the interface at IP address
with a
netmask of
:
network