Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
PDSN Service Configuration Mode Commands
▀ sdb-indication
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
sdb-indication
Configures parameters pertaining to Short Data Burst (SDB) functionality.
Product
PDSN
Privilege
Security Administrator, Administrator
Syntax
Disables short-databurst indication.
Default: Disabled
Enables the inclusion of the SDB indicator in the LCP Echo Request message(s).
Enables the inclusion of the SDB indicator in the LCP Echo Request message(s).
Configures the IP address of the PTT server.
is the IP address expressed in dotted decimal notation.
is the number of mask bits.
Configures the packet length associated with the specified server.
configures the minimum packet length as an integer value between 1 and 65535.
configures the maximum packet length as an integer value between 1 and 65535.
Usage
This command controls the use of Short Data Burst functionality between the PDSN, PCF, and Push-to-Talk
(PTT) servers.
(PTT) servers.
Important:
This command is for use with a customer-specific implementation and requires a valid Short Data
Burst feature-use license to be installed.
Example
The following command configures a PTT server address of 192.168.1.200 with a mask of 16, a minimum packet size
of 200, and a maximum packet size of 400:
The following command configures a PTT server address of 192.168.1.200 with a mask of 16, a minimum packet size
of 200, and a maximum packet size of 400: