Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
APN Configuration Mode Commands
▀ cc-sgsn
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
specifies the behavior bit for the charging characteristic. This variable can be configured to any unique
bit from 001H to FFFH (0001 to 1111 1111 1111 bin) where the least-significant bit corresponds to B1 and
the most-significant bit corresponds to B12.
the most-significant bit corresponds to B12.
indicates which profile defined with
, in GGSN Service Configuration mode, GGSN
uses as a source for CCs. The index can be configured to any integer value from 0 to 15.
keyword can be entered alone or in conjunction with the
keyword. When
entered, this keyword, overrides previous configuration using any of the home, roaming, and/or visiting
keywords.
keywords.
More than one of the above keywords can be entered within a single command.
Usage
This command specifies whether or not CCs received from the SGSN will be accepted. If they are not
accepted, the GGSN will use those that have been configured locally.
The GGSN‘s behavior can be configured for the following subscriber types:
accepted, the GGSN will use those that have been configured locally.
The GGSN‘s behavior can be configured for the following subscriber types:
Home: Subscribers belonging to the same Public Land Mobile Network (PLMN) as the one on which
the GGSN is located.
Roaming: Subscribers that are serviced by a an SGSN belonging to a different PLMN than the one on
which the GGSN is located.
Visiting: Subscribers belonging to a different PLMN than the one on which the GGSN is located.
Any subscriber in the APN.
Example
The following command instructs the GGSN to accept CCs for any subscriber in the APN based on local profile
configurations of CCs.
The following command instructs the GGSN to accept CCs for any subscriber in the APN based on local profile
configurations of CCs.
Assuming the CC source as defined with the previous command, the following command instructs the GGSN to accept
CCs supplied by the SGSN(s) and disables the acceptance of CCs supplied by the GGSN for any subscriber within the
APN:
CCs supplied by the SGSN(s) and disables the acceptance of CCs supplied by the GGSN for any subscriber within the
APN:
The following command instructs the GGSN to accept CCs for any subscriber in the APN based on CC information
returned from the RADIUS server. This command can be issued after the previous command to expand the possible
sources.
returned from the RADIUS server. This command can be issued after the previous command to expand the possible
sources.
The following command disables the acceptance of CCs supplied by the GGSN for visiting and roaming subscribers: