Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Route-map Configuration Mode Commands
match origin ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
match origin
This command matches the origin code learned from BGP. This command is for route maps that are used with BGP
routing only.
routing only.
Product
HA
Privilege
Security Administrator, Administrator
Syntax
Disables matching of the origin code.
Match origins learned from learned from the External Gateway Protocol (EGP)
Match origins learned from learned from the local Interior Gatewway Protocol (IGP)
Match origins with unknown heritage.
Usage
Use this command to match origin codes for BGP routing.
Example
To match origin codes learned from EGP, enter the following command:
match origin egp
To match origin codes learned from EGP, enter the following command:
match origin egp