Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Rulebase Configuration Mode Commands
nat suppress-aaa-update ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
nat suppress-aaa-update
This command suppresses the sending of NAT bind updates (NBU) to the AAA server when PPP disconnect happens.
Important:
This command is customer-specific. For more information please contact your local service
representative. In StarOS 9.0, this command is available in the Firewall-and-NAT Policy Configuration Mode.
Product
NAT
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: No suppression of AAA updates
Default: No suppression of AAA updates
Usage
Use this command to suppress the sending of NAT bind updates (NBU) to the AAA server when PPP
disconnect happens, as these NBUs would be cleared at the AAA after receiving the accounting-stop. This
enables to minimize the number of messages between the chassis and AAA server. When not configured,
NAT bind updates are sent to the AAA server whenever a port chunk is allocated, de-allocated, or the call is
cleared (PPP disconnect).
disconnect happens, as these NBUs would be cleared at the AAA after receiving the accounting-stop. This
enables to minimize the number of messages between the chassis and AAA server. When not configured,
NAT bind updates are sent to the AAA server whenever a port chunk is allocated, de-allocated, or the call is
cleared (PPP disconnect).
Example
The following command suppresses the sending of NAT bind updates (NBU) to the AAA server when PPP disconnect
happens:
The following command suppresses the sending of NAT bind updates (NBU) to the AAA server when PPP disconnect
happens: