Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
APN Configuration Mode Commands
ip local-address ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip local-address
Configures the local-side IP address of the subscriber's point-to-point connection.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Removes a previously configured IP local-address.
Specifies an IP address configured in a destination context on the system through which a packet data
network can be accessed.
network can be accessed.
must be expressed in dotted-decimal notation.
Usage
This parameter specifies the IP address on the system that the MS uses as the remote-end of the PPP
connection. If no local address is configured, the system uses an unnumbered scheme for local-side addresses.
connection. If no local address is configured, the system uses an unnumbered scheme for local-side addresses.
Example
The following command configures a local address of 192.168.1.23 for the MS:
The following command configures a local address of 192.168.1.23 for the MS: