Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
SGSN Service Configuration Mode Commands
▀ check-imei-timeout-action
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
check-imei-timeout-action
This command configures the action to be taken if a Check-IMEI fails due to a timeout. This command is available in
releases 8.1 and higher.
releases 8.1 and higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Rejects the Attach or ISRAU procedure if a Check-IMEI timeout occurs.
Instructs the SGSN to continue the Attach or ISRAU procedure if a Check-IMEI timeout occurs because the
EIR is not reachable. This functionality matches standard call flow.
EIR is not reachable. This functionality matches standard call flow.
Instructs the SGSN to reject the Attach or ISRAU procedure if a Check-IMEI timeout occurs.
Usage
Use this command only if the Gf interface (EIR) is available in the network. This command controls the
SGSN reaction if the Check-IMEI procedure fails due to a timeout.
The
SGSN reaction if the Check-IMEI procedure fails due to a timeout.
The
option allows the SGSN to go forward with the MS Attach or RAU, if the first Check-IMEI
fails to reach the EIR due to a timeout. Any subsequent activity (such as a RAU or Service Request would
force another Check-IMEI towards the EIR. If this subsequent MAP Check-IMEI should fail, then the same
policy of continuing the procedure would apply.
force another Check-IMEI towards the EIR. If this subsequent MAP Check-IMEI should fail, then the same
policy of continuing the procedure would apply.
Example