Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Subscriber Configuration Mode Commands
ip vlan ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
ip vlan
Configures subscriber-to-Virtual LAN (VLAN) associations.
Product
PDSN, HA
Privilege
Security Administrator, Administrator
Syntax
Resets the vlan ID to the default setting.
Disables the vlan ID for the subscriber.
Is the vlan ID that is associated with the IP address for that session.
is an integer between 1 and
4094.
Usage
This command configures the subscriber vlan ID which is used with the assigned address for the subscriber
session to receive packets. If the IP pool from which the address is assigned is configured with a vlan ID, then
this subscriber configured vlan ID overrides it.
Subscriber traffic can be routed to specific VLANs based on the configuration of their user profile. Using this
functionality provides a mechanism for routing all traffic from a subscriber over the specified VLAN. All
packets destined for the subscriber must also be sent using only IP addresses valid on the VLAN or they will
be dropped.
session to receive packets. If the IP pool from which the address is assigned is configured with a vlan ID, then
this subscriber configured vlan ID overrides it.
Subscriber traffic can be routed to specific VLANs based on the configuration of their user profile. Using this
functionality provides a mechanism for routing all traffic from a subscriber over the specified VLAN. All
packets destined for the subscriber must also be sent using only IP addresses valid on the VLAN or they will
be dropped.
Example
Set the vlan ID to the default setting by entering the following command;
Set the vlan ID to the default setting by entering the following command;