Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
BGP Address-Family (VPNv4) Configuration Mode Commands
neighbor ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
neighbor
This command configures VPNv4 address family on BGP routers that interconnect to non-broadcast networks and
enables the exchange of routing information with a peer router (neighbor).
enables the exchange of routing information with a peer router (neighbor).
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
Delete the specified parameter from the router configuration.
Specifies the IP address of the peer router (neighbor).
Enable the exchange of routing information with this neighbor.
Specify the AS number of the BGP neighbor.
: The neighbor‘s autonomous system number. must be an integer from 1 through 65535.
This keyword sends the extended community attributes to a peer router (neighbor).
Usage
Use this command to enable the exchange of routing information with a peer router. The chassis supports a
maximum of 64 peers per context.
maximum of 64 peers per context.
Important:
A remote AS number must be specified for a neighbor before other parameters can be configured.
Example
The following command specifies that the neighbor at the IP address 192.168.100.25 has an AS number of 2000:
The following command specifies that the neighbor at the IP address 192.168.100.25 has an AS number of 2000: