Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Card Configuration Mode Commands
framing ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
framing
This command configures the type of framing used for the signaling generated on a specific type of line card.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Resets the framing generated by the card to the default for the particular card type.
Configures the system to use Ethernet framing for this line card. This type of framing can only be used on an
ethernet card.
Default: Ethernet framing type is the default for an Ethernet line card.
ethernet card.
Default: Ethernet framing type is the default for an Ethernet line card.
Important:
Using this keyword with an OLC/OLC2 or CLC/CLC2 would take the card offline.
Configures the system to use SDH signal framing for either an OLC/OLC2 or CLC/CLC2 line card in an
SGSN.
SGSN.
Important:
Using this keyword with an Ethernet line card would take the line card offline.
In releases 8.1 and higher, you can also set the type of signaling path for a CLC2.
- configures the card to support a DS1/T1.
- configures the card to support an E1. This is the default for SDH.
Configures the system to use SONET signal framing for either an OLC/OLC2 or CLC/CLC2 line card in an
SGSN.
Default: SONET is the default framing type for an OLC/OLC2 or CLC/CLC2 line card.
SGSN.
Default: SONET is the default framing type for an OLC/OLC2 or CLC/CLC2 line card.
Important:
Using this keyword with an Ethernet line card would take the line card offline.
In releases 8.1 and higher, you can also set the type of signaling path for a CLC2.
- configures the card to support a DS1/T. This is the default for SONET.