Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
APN Configuration Mode Commands
l3-to-l2-tunnel address policy ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
l3-to-l2-tunnel address policy
Configures the address allocation/validation policy, when subscriber L3 (IPv4/IPv6) sessions are tunneled using a L2
tunneling protocol, such as L2TP.
tunneling protocol, such as L2TP.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Syntax
Default: Disabled
Specifies that the system locally allocates and validates subscriber addresses.
Specifies that the system locally allocates and validates subscriber addresses.
Default: Disabled
Specifies that the system allocates addresses for cases in which IP addresses are dynamically assigned. The
system does not validate the address specified by the subscriber.
Specifies that the system allocates addresses for cases in which IP addresses are dynamically assigned. The
system does not validate the address specified by the subscriber.
Default: Enabled
Specifies that the system does not allocate or validate subscriber addresses locally for such sessions, it passes
the address between remote tunnel terminator to the Mobile Node.
Specifies that the system does not allocate or validate subscriber addresses locally for such sessions, it passes
the address between remote tunnel terminator to the Mobile Node.
Usage
This command can be useful for such tunnels are MIP HA sessions tunneled from the system using a L2TP
tunnels or GGSN PDP contexts of type IP tunneled using L2TP to a remote LNS.
tunnels or GGSN PDP contexts of type IP tunneled using L2TP to a remote LNS.
Example
The following command configures the system to locally allocate and validate subscriber addresses:
The following command configures the system to locally allocate and validate subscriber addresses: