Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
APN Configuration Mode Commands
▀ npu qos
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
npu qos
Configures an NPU QoS priority queue for packets facilitated by the APN.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator\
Syntax
Removes a previously configured priority queue.
Assigns the best-effort queue priority. This is the lowest priority.
Assigns the bronze queue priority. This is the third-highest priority.
Default: Enabled
Specifies that the priority is to be determined from the DSCP field in the packet's TOS octet.
Specifies that the priority is to be determined from the DSCP field in the packet's TOS octet.
Assigns the gold queue priority. This is the highest priority.
Assigns the silver queue priority. This is the second-highest priority.
Usage
This command is used in conjunction with the Network Processing Unit (NPU) Quality of Service (QoS)
functionality.
The system can be configured to determine the priority of a subscriber packet either based on the
configuration of theAPN, or from the differentiated service (DS) field in the packet's TOS octet (representing
the differentiated service code point (DSCP) value).
Refer to the GGSN System Administration and Configuration Guide for additional information on NPU QoS
functionality.
functionality.
The system can be configured to determine the priority of a subscriber packet either based on the
configuration of theAPN, or from the differentiated service (DS) field in the packet's TOS octet (representing
the differentiated service code point (DSCP) value).
Refer to the GGSN System Administration and Configuration Guide for additional information on NPU QoS
functionality.
Example
The following command configures the APN‘s priority queue to be gold:
The following command configures the APN‘s priority queue to be gold: