Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Border Gateway Protocol IP VRF Configuration Mode Commands
▀ route-target
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
route-target
This command adds a list of import and/or export route target extended communitites to the VRF.
Product
PDSN, GGSN
Privilege
Security Administrator, Administrator
Syntax
This keyword creates list of import route targets for the VRF with same parameters. The list contains AS
number or IP address along with RT value.
number or IP address along with RT value.
The
is a 16-bit autonomous-system (AS) number from 0 through 65535.
is an 32 bit IP address in IPv4 dotted decimal notation.
is an unique route target identifier and must be an integer between 0 through 4294967295.
Usage
Use this command to create the list of export and/or import route target extended communities for VRF. It
specifies the a target VPN extened community.
A maximm of 5 route targets can be defined with this command up to release 9.0.
specifies the a target VPN extened community.
A maximm of 5 route targets can be defined with this command up to release 9.0.
Important:
This command must be executed for each route target extended communities.
Example
The following command creates an export list of route target extended community
The following command creates an export list of route target extended community
for VRF with AS number
:
The following command creates an export list of route target extended community
for VRF with IP address
: