Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Channelized Port Configuration Mode Commands
▀ clock-source
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
clock-source
This command sets the source of the port‘s transmit clock.
Important:
This command is only available for releases 8.1 or higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Using this command combination sets the port clock source to internal timing.
Sets the port clock to derive timing from the recovered receive clock.
Sets the port clock to transmit in sync with the system timing.
Usage
Use this command for either SONET or SDH channelized (Frame Relay) ports on the SGSN.
Example
The following command resets the transmit clock source to internal timing.
The following command resets the transmit clock source to internal timing.