Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Context Configuration Mode Commands
▀ ims-sh-service
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ims-sh-service
This command creates the specified IMS Sh service name to allow configuration of Sh service.
Product
PDIF, SCM
Privilege
Administrator
Syntax
Removes a previously configured IMS-Sh-service.
Name of the IMS-Sh-service to be configured.
must be from 1 to 63 alpha and/or numeric characters.
Usage
The IMS-Sh-service is named in the pdif-service and/or cscf-service. Use this command to enter the IMS Sh
Service Configuration Mode.
Entering this command results in the following prompt:
[
Service Configuration Mode.
Entering this command results in the following prompt:
[
]
(config-ims-sh-service)#
IMS Sh Service Configuration Mode commands are defined in the IMS Sh Service Configuration Mode
Commands chapter in this guide.
Commands chapter in this guide.
Example
The following example names a service to be configured:
The following example names a service to be configured: