Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Crypto Template Configuration Mode Commands
▀ keepalive
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
keepalive
Configures keepalive or dead peer detection for security associations used within this crypto template.
Product
PDIF
Privilege
Security Administrator, Administrator
Syntax
Disables keepalive messaging.
Default: 10
Specifies the amount of time in seconds that must elapse before the next keepalive request is sent.
Specifies the amount of time in seconds that must elapse before the next keepalive request is sent.
must
be an integer from 10 to 3600.
Default: 10
Specifies the amount of time in seconds that the system will wait without receiving a reply before retrying the
keepalive request.
Specifies the amount of time in seconds that the system will wait without receiving a reply before retrying the
keepalive request.
must be an integer from 10 to 3600.
Default: 2
Specifies the number of times the system will retry a non-responsive peer before defining the peer as off-line
or out-of-service.
Specifies the number of times the system will retry a non-responsive peer before defining the peer as off-line
or out-of-service.
must be an integer from 1 to 100.
Usage
Use this command to set parameters associated with determining the availability of peer servers.
Example
The following command sets a keepalive interval to three minutes, the timeout to 30 seconds, and the retry attempts
number to :
The following command sets a keepalive interval to three minutes, the timeout to 30 seconds, and the retry attempts
number to :