Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
DHCP Service Configuration Mode Commands
▀ dhcp server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
dhcp server
Configures DHCP servers with which the DHCP service is to communicate.
Product
GGSN, ASN-GW
Privilege
Security Administrator, Administrator
Syntax
Deletes a previously configured DHCP server.
Specifies the IP address of the DHCP server expressed in dotted decimal notation.
Specifies the priority of the server if multiple servers are configured.
can be configured to any integer value from 1 to 1000. 1 is the highest priority.
Usage
Use this command to configure the DHCP server(s) that the system is to communicate with. Multiple servers
can be configured each with their own priority. Up to 20 DHCP servers can be configured.
All DHCP messages are sent/received on UDP port 67.
can be configured each with their own priority. Up to 20 DHCP servers can be configured.
All DHCP messages are sent/received on UDP port 67.
Important:
If a server is removed, all calls having an IP address allocated from the server will be released.
Example
The following command configures a DHCP server with an IP address of 192.168.1.200 and a priority of 1:
The following command configures a DHCP server with an IP address of 192.168.1.200 and a priority of 1: