Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Diameter Endpoint Configuration Mode Commands
origin host ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
origin host
This command sets the origin host for the Diameter endpoint.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the origin host configuration.
Specifies the host name to bind the Diameter endpoint.
must be the local Diameter host name, and must be a string of 1 through 255 characters in
length.
Specifies the IP address to bind the Diameter endpoint. This address must be one of the addresses of a chassis
interface configured within the context in which Diameter is configured.
interface configured within the context in which Diameter is configured.
must either be an IPv4 address expressed in dotted decimal notation, or an IPv6 address
expressed in colon notation.
Specifies the port number for the Diameter endpoint (on inbound connections).
must be an integer from 1 through 65535.
Specifies to accept inbound connection requests for the specified host.
Specifies the secondary bind address for the Diameter endpoint. This address must be one of the addresses of
a chassis interface configured within the context in which Diameter is configured.
a chassis interface configured within the context in which Diameter is configured.
must either be an IPv4 address expressed in dotted decimal notation, or an
IPv6 address expressed in colon notation.
Usage
Use this command to set the bind address for the Diameter endpoint.