Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Ethernet Interface Configuration Mode Commands
▀ ip
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip
Configures the IP options for the current interface.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Disables and/or restores the option to the system default.
specifies the access control list to be added/removed from the group. The ACL rules must be
configured in the same context as the interface.
In Release 8.1 and later,
In Release 8.1 and later,
must be an alpha and/or numeric string of 1 through 47 characters in
length.
In Release 8.0 and earlier,
In Release 8.0 and earlier,
must be an alpha and/or numeric string of 1 through 79 characters in
length.
The direction must also be specified as either inbound or outbound using the keywords
The direction must also be specified as either inbound or outbound using the keywords
and
,
respectively.
: Default: 0. If more than one ACL is applied,
specifies the priority
in which they will be compared against the packet. If not specified, the priority is set to 0.
must be an integer from 0 through 4294967295. If access groups in the list have the same priority, the
last one entered is used first.
Important:
Up to 8 ACLs can be applied to a group provided that the number of rules configured within the
ACL(s) does not exceed the 128 rule limit for the interface.
Configures the IP address for the interface specifying the networking mask as well.
and
must be specified using the standard IPv4/IPv6 notation.
The
keyword is used to configure a secondary IP address on the interface. This is referred to as
multi-homing of the interface.
The
The
Activates the IP address for Interchassis Session Redundancy.