Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (A-C)
show active-charging packet-filter ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show active-charging packet-filter
This command displays information on packet filters configured in an ACS service.
Product
ACS
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays information for all packet filters configured, optionally all configured in an ACS service.
Displays detailed information for the specified packet filter.
must be the name of a packet filter, and must be an alpha and/or numeric string of
1 through 63 characters in length.
Displays information for all or the specified packet filter in the specified ACS service.
must be the name of the ACS service, and must be an alpha and/or numeric string of
1 through 15 characters in length.
Specifies that output of this command is to be piped (sent) to the command specified. A command to send the
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to view information on packet filters configured in an ACS service.
Example
The following command displays information for the packet filter
The following command displays information for the packet filter
: