Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (M-P)
▀ show ntp
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show ntp
Displays the network timing protocol associations and status.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
: displays the current NTP server associations and related statistics.
: displays the client permeates configured and the synchronization status.
: the IP address of a specific NTP server/client in the current context.
must be specified using the standard IPv4 dotted decimal notation.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command‘s Output section of the
Command Line Interface Overview chapter in the Cisco ASR 500 Series Command Line Interface Reference.
Usage
View network timing protocol information to troubleshooting system clock issues by displaying the
associations and status of the local NTP client.
associations and status of the local NTP client.
Example
The following displays the NTP associations and status, respectively.
The following displays the NTP associations and status, respectively.
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.