Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (Q-S)
show session trace ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show session trace
Displays status and statistics for the session trace application.
Product
MME, P-GW, S-GW
Privilege
Inspector
Syntax
Displays summary statistics of the session trace subsystem.
Displays status and statistics of a specified session trace using the network element type and the trace
reference.
reference.
must be a valid trace reference 12 characters in length.
Displays status and statistics of a specified Trace Collection Entity (TCE) connection.
must be
a valid existing collection entity IPv4 address and is specified in dotted decimal notation.
Displays a summary of all active TCE connections.
Displays a summary of all active session traces.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
Please refer to the Regulating the Command Output section in this reference for details on the usage of
output to must be specified.
Please refer to the Regulating the Command Output section in this reference for details on the usage of
and
.
Usage
Use this command to display status and statistics for the session trace application.
Example
The following command displays status and statistics for a subscriber session trace on a P-GW with a trace reference of
The following command displays status and statistics for a subscriber session trace on a P-GW with a trace reference of
: