Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Exec Mode Show Commands (Q-S)
show subscribers ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
show subscribers
Shows information for subscriber sessions defined by the specified keywords. Keywords described under Command
Keywords below are base commands that display distinctive type of data. Keywords described under Filter Keywords
are filters that modify or filter the output of the base commands. Not all filter keywords are available for all command
keywords commands. Each command keyword lists the filter keywords that it accepts.
Keywords below are base commands that display distinctive type of data. Keywords described under Filter Keywords
are filters that modify or filter the output of the base commands. Not all filter keywords are available for all command
keywords commands. Each command keyword lists the filter keywords that it accepts.
Product
All
Privilege
Security Administrator, Administrator, Inspector, Operator
Syntax
The following keywords are base commands that each have a distinct display output. Only one Command
Keyword can entered on the command line.
Keyword can entered on the command line.
Shows AAA configuration information for subscriber sessions defined by the specified filter keywords. The
following filter keywords are valid with this command:
following filter keywords are valid with this command:
,
,
, ha, ha-service, idle-time,
imsi, ip-address, ip-pool, lac, lac-service, lns, lns-service, long-duration-time-left, msid, network-requested,
network-type, pcf, pdsn-service,
network-type, pcf, pdsn-service,
,
,
Shows the ip-flows for the subscribers defined by the specified filter keywords.
: Use this keyword to display the accounting type of access flows for a subscriber.
: Use this keyword to display the dynamic type of access flows for a subscriber.
: Use this keyword to display the pre-provisioned type of access flows for a WiMAX
subscriber.
: Use this keyword to display the static type of access flows for a subscriber.
The following filter keywords are valid with this command: