Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 5213
GGSN Service Configuration Mode Commands   
▀  bind 
 
▄  Cisco ASR 5000 Series Command Line Interface Reference 
OL-22947-02   
bind 
Binds the GGSN service to a logical IP interface serving as the Gn interface. Specifies the maximum number of 
subscribers that can access this service over the interface. 
Product
 
GGSN 
Privilege
 
Security Administrator, Administrator 
Syntax
 
Removes a previously configured binding for the GGSN service. 
Specifies the IP address (address) of the interface configured as the Gn interface. address is specified in 
dotted decimal notation. 
Default: 1,500,000 
Specifies the maximum number of PDP contexts (both IP and PPP) that can access this service on this 
interface. 
 can be configured to any integer value between 0 and 1,500,000 on ST16. 
 can be configured to any integer value between 4,000,000 on ASR 5000. 
Important:
  The maximum number of subscriber contexts supported is dependant on the session capacity license 
installed and the number of active PACs/PSCs installed in the system. A fully loaded ST16 system with 13 active PACs 
can support 1,500,000 and an ASR 5000 with 13 active PSCs can support 4,000,000 total IP and PPP PDP contexts. 
Note that each PPP PDP context is treated as two IP PDP contexts. Refer to the license key command for additional 
information. 
Default: 750,000 
Specifies the maximum number of PPP PDP contexts that can access this service on this interface. 
 can be configured to any integer value between 0 and 1,500,000 on ST16. 
 can be configured to any integer value between 0 and 2,500,000 on ASR 5000. 
Important:
  The maximum number of subscriber contexts supported is dependant on the session capacity license 
installed and the number of active PACs installed in the system. A fully loaded ST16 system with 13 active PACs can 
support 1,500,000 PPP PDP contexts. Refer to the license key command for additional information.