Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Global Configuration Mode Commands
port rs232 ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
port rs232
Enters the RS-232 Port Configuration mode for the RS-232 port on the specified SPIO card. Not available on the XT2
platform.
platform.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Indicates the port identified is an RS-232 port on a SPIO card.
Specifies the slot of the SPIO for which RS-232 Port Configuration mode is being entered. The slot must
refer to an installed SPIO card. The specified port must always be 3 for an RS-232 port.
The value for
refer to an installed SPIO card. The specified port must always be 3 for an RS-232 port.
The value for
must be either 24 or 25.
Usage
Change the current configuration mode to RS-232 Port Configuration mode.
Example
The following command enters the RS-232 Port Configuration mode for the SPIO in slot 24;
The following command enters the RS-232 Port Configuration mode for the SPIO in slot 24;