Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Global Configuration Mode Commands
▀ qos npu inter-subscriber traffic bandwidth
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
that a CP can sustain. Each subscriber queue receives an allocation of a certain percentage of the CP-BPS.
The following maximum CP-BPS values are supported:
The following maximum CP-BPS values are supported:
Lead CP (CP0) = 128 Mbps
Remaining CPs (CP1, CP2, CP3) = 256 Mbps
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
Configuration Guide.
Important:
This functionality is not supported for use with the PDSN at this time.
Example
The following command configures bandwidth allocations of 20, 30, 40, and 50% for the gold, silver, bronze, and best-
effort queues respectively:
The following command configures bandwidth allocations of 20, 30, 40, and 50% for the gold, silver, bronze, and best-
effort queues respectively:
Upon executing this command, the priority queues will have the following PAC/PSC/PSC2 CP bandwidth allocations
based on the maximum CP bandwidth specifications:
based on the maximum CP bandwidth specifications:
Priority
Lead CP (CP 0) Bandwidth (Mbps)
CP 1 through CP 3 Bandwidth (Mbps)
Gold
25.6
51.2
Silver
38.4
76.8
Bronze
51.2
102.4
Best-effort 64
128