Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
GTPP Server Group Configuration Mode Commands
gtpp deadtime ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
gtpp deadtime
Configures the amount of time the GGSN/SGSN waits before attempting to communicate with a CGF that was
previously marked as unreachable (non-responsive).
previously marked as unreachable (non-responsive).
Product
GGSN, SGSN
Privilege
Security Administrator, Administrator
Syntax
Resets the deadtime to the default of 120 seconds.
Default: 120
Specifies the amount of time that must elapse before the system attempts to communicate with a CGF that
was previously unreachable.
Specifies the amount of time that must elapse before the system attempts to communicate with a CGF that
was previously unreachable.
is measured in seconds and can be configured to any integer value from 1 to 65535.
Usage
If the system is unable to communicate with a configured CGF, after a pre-configured number of failures the
system marks the CGF as being down.
This command specifies the amount of time that the system waits prior to attempting to communicate with
the downed CGF.
Refer to the
system marks the CGF as being down.
This command specifies the amount of time that the system waits prior to attempting to communicate with
the downed CGF.
Refer to the
and
commands for additional
information on the process the system uses to mark a CGF as down.
Example
The following command configures the system to wait 60 seconds before attempting to re-communicate with a CGF that
was marked as down:
The following command configures the system to wait 60 seconds before attempting to re-communicate with a CGF that
was marked as down: