Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
MAG Service Configuration Mode Commands
▀ renew-percent-time
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
renew-percent-time
Configures percentage of lifetime at which a registration renewal is sent to the LMA.
Product
HSGW, S-GW
Privilege
Administrator
Syntax
Resets the command to the default value of 75.
Default: 75
Specifies the time when the registration renewal is sent to the LMA.
Specifies the time when the registration renewal is sent to the LMA.
is a percentage value of the
registration lifetime and must be an integer value from 1 to 100.
Usage
Use this command to specify when a registration renewal is sent to the LMA for subscribers using this
service.
If the registration lifetime is 600 seconds (10 minutes) and this command is set to 75 (percent), then the
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
service.
If the registration lifetime is 600 seconds (10 minutes) and this command is set to 75 (percent), then the
registration renewal message is sent after 450 seconds of the registration lifetime has expired.
Example
The following command sets the registration renewal time for subscribers using this service to 90 percent of the
registration lifetime:
The following command sets the registration renewal time for subscribers using this service to 90 percent of the
registration lifetime: