Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ACS Packet Filter Configuration Mode Commands
▀ ip remote-address
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
ip remote-address
This command configures the IP remote address parameter for the packet filter.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
In StarOS 8.x releases:
In StarOS 9.0 and later releases:
Removes the remote address configuration, if previously configured.
specifies the IP address in IPv4 dotted decimal or IPv6 colon separated notation format.
specifies the IP address in IPv4 dotted decimal or IPv6 colon separated notation
format, and the number of subnet bits representing the subnet mask in shorthand.
Important:
In StarOS 9.0 and later releases this keyword is obsolete.
specifies a range of IP addresses.
and
specify, for the range, the starting and ending IP address in
IPv4 dotted decimal or IPv6 colon separated notation format.
must be greater than
.
and
specify, for the range, the starting and
ending IP address in IPv4 dotted decimal or IPv6 colon separated notation format, and the number of subnet
bits representing the subnet mask in shorthand.
bits representing the subnet mask in shorthand.
must be greater than
.
Usage
Use this command to configure the remote IP address parameter for a packet filter.