Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
RoHC Profile Common Options Configuration Mode Commands
inactive-traffic-release-hc-context-timer ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
inactive-traffic-release-hc-context-timer
Set an inactivity timer that is checked when inactivity is detected on an SO67 A10 bearer connection with negotiated
RoHC parameters. If the inactivity continues to the end of the configured time, the header compression context is
released.
RoHC parameters. If the inactivity continues to the end of the configured time, the header compression context is
released.
Product
HSGW, PDSN
Privilege
Administrator
Syntax
Removes previously configured value for this command. No value disables the feature.
Specifies the time, in seconds, the system waits for activity on the bearer channel before releasing the header
compression context.
compression context.
must be an integer value from 1 to 65535.
Usage
Use this command to set a timer that is started upon detecting inactivity on the bearer channel. Upon expiry,
the header compression context is released. Enable this feature to allow for efficient memory utilization.
the header compression context is released. Enable this feature to allow for efficient memory utilization.
Example
The following command sets the bearer channel inactivity timer to 60 seconds:
The following command sets the bearer channel inactivity timer to 60 seconds: