Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ACS Rulebase Configuration Mode Commands
▀ egcdr threshold
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
egcdr threshold
This command sets the eG-CDR volume or interval values to generate the interim eG-CDRs and write them to eG-CDR
file.
file.
Product
GGSN, ACS
Privilege
Security Administrator, Administrator
Syntax
Removes previously configured eG-CDR threshold.
Disables the eG-CDR threshold settings.
Specifies the time interval (in seconds) for closing the eG-CDR if the minimum time duration thresholds are
satisfied. By default this option is disabled.
satisfied. By default this option is disabled.
must be an integer from 60 through 40000000.
: This option enables the eG-CDR generation at the fixed time
interval irrespective of any other eG-CDR triggers that may have happened in between.
Specifies the uplink/downlink volume octet counts for the generation of the interim eG-CDRs.
: Specifies the limit for the number of downlink octets after which the eG-CDR is
closed.
must be an integer from 100,000 through 4,000,000,000.
Default: 4,000,000,000
: Specifies the limit for the total number of octets (uplink+downlink) after which the
eG-CDR is closed.
must be an integer from 100,000 through 4,000,000,000.
Default: Disabled
: Specifies the limit for the number of uplink octets after which the eG-CDR is closed.
must be an integer from 100,000 through 4,000,000,000.
Default: 4,000,000,000