Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
SGSN PSP Configuration Mode Commands
end-point ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
end-point
This command defines or deletes the IP address to be associated with the local SCTP end-point for the application
server process (ASP).
server process (ASP).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Configures the M3UA‘s SCTP port number for the end-point.
Must be an integer from 1 to 65535.
Default: 2905.
Removes the ASP end-point association configuration from the PSP configuration.
Important:
This command can not be used as long as the PSP and the ASP are associated.
Usage
Use this command to manage the ASP end-point. At least one address needs to be configured for the ASP
before the end-point can be associated with the PSP.
before the end-point can be associated with the PSP.
Example
Set the ASP end-point to IP address 192.168.1.1 with the following command:
Set the ASP end-point to IP address 192.168.1.1 with the following command: