Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
ACS Rulebase Configuration Mode Commands
firewall tcp-first-packet-non-syn ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
firewall tcp-first-packet-non-syn
This command configures the action to take on TCP flow starting with a non-syn packet.
Important:
In StarOS 8.1 and StarOS 8.3, use this command for Rulebase-based Firewall-and-NAT
configuration. In StarOS 8.1 and StarOS 9.0 and later, for Policy-based Firewall-and-NAT configuration, this command
is available in the Firewall-and-NAT Policy Configuration Mode.
is available in the Firewall-and-NAT Policy Configuration Mode.
Product
FW
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default:
Default:
Specifies the action to take on TCP flow starting with a non-syn packet.
: Drops the packet or session
: Sends reset
Usage
Use this command to configure action to take on TCP flow starting with a non-syn packet.
Example
The following command configures action to take on TCP flow starting with a non-syn packet to drop:
The following command configures action to take on TCP flow starting with a non-syn packet to drop: