Cisco Cisco Packet Data Interworking Function (PDIF) Guia De Resolução De Problemas
Class-Map Configuration Mode Commands
▀ match dst-port-range
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
match dst-port-range
This command specifies a traffic classification rule based on the range of destination ports of L4 packets.
Product
PDSN, HA, ASN-GW
Privilege
Security Administrator, Administrator
Syntax
Specifies the destination port or range of ports of L4 packets.
is the starting port number and must be an integer value in the range from 1
through 65535 but less than
, if specified.
is the end port number and must be an integer value in the range from 1 through
65535 but more than
.
Usage
Sets the match rule based on the destination port number or range of ports of L4 packets for specific Class
Map.
Map.
Example
The following commands specifies the rule for packets having destination port number from 23 to 88.
The following commands specifies the rule for packets having destination port number from 23 to 88.