Cisco Cisco Packet Data Interworking Function (PDIF) Guia De Resolução De Problemas
Context Configuration Mode Commands
▀ route-access-list extended
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
route-access-list extended
This command configures an access list for filtering routes based on a specified range of IP addresses.
Product
PDSN, HA, GGSN
Privilege
Security Administrator, Administrator
Syntax
Deletes the specified route access list.
A value to identify the route access list.
must be an integer from 100 through 999.
Deny routes that match the specified criteria.
Permit routes that match the specified criteria.
This specifies the network portion of the route to match. The network portion of the route is mandatory and
must be expressed in one of the following ways:
must be expressed in one of the following ways:
: A network address and wildcard mask expressed in IPv4 dotted decimal
notation. (192.168.100.0 0.0.0.255)
: Match any network address.
: Match the specified network address exactly.
must be
an IPv4 address specified in dotted decimal notation.
This specifies the mask portion of the route to match. The mask portion of the route is mandatory and must be
expressed in one of the following ways;
expressed in one of the following ways;
: A mask address and wildcard mask expressed in IPv4 dotted decimal
notation. (255.255.255.0 0.0.0.255)
: Match any network mask.
: Match the specified mask address exactly.
must be an IPv4
address specified in dotted decimal notation.