Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção
Generally Available 06-30-2010
New Configuration Commands
3-13
firewall udp-checksum-error
This command configures Stateful Firewall action on packets with UDP Checksum errors.
CLI (Firewall-and-NAT Policy Configuration Mode)
firewall udp-checksum-error { drop | permit }
default firewall udp-checksum-error
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.
firewall validate-ip-options
This command enables / disables the Stateful Firewall validation of IP options for errors.
When enabled, Stateful Firewall will drop packets with IP option errors.
When enabled, Stateful Firewall will drop packets with IP option errors.
CLI (Firewall-and-NAT Policy Configuration Mode)
[ default | no ] firewall validate-ip-options
Web Element Manager Path
This functionality is not supported at this time on the Web Element Manager.