Cisco Cisco Packet Data Gateway (PDG) Manual De Manutenção

Configuration Management

Generally Available    06-30-2010 

3-14

Flow control is enabled by default on the Quad- Gig-E line card. If flow control is not 
required, it can be disabled on a per-port basis using the 

 option.

This functionality is not supported at this time on the Web Element Manager.

A new command manages the RAID properties on the ST40 SMC hard disks when the hard 
disk controller task cannot automatically make the correct decisions or admin intervention 
is required by policy enforcement. 

hd raid { check | create { local1 | remote1 } | insert { local1 | remote1 } 

| overwrite { local1 | remote1 } | remove { local1 | remote1 } | select { 

local1 | remote1 } }

A new command accesses the HD RAID configuration mode which defines HD RAID 
management policies with the following commands: 

- end
- exit
- overwrite
- select

This functionality is not supported on the Web Element Manager at this time.

Allows a session idle-timeout to be reset with either uplink-only traffic or both uplink and 
downlink traffic. The default is 

.

If 

 is configured, the downlink traffic will not 

be used to reset the idle-timeout. Only uplink packets will be able to reset the idle-timeout.
By default,

 is negated by the 

 command so both uplink and downlink 

traffic is used to reset the idle-timeout.